ROOFINGS

WHERE ART AND FUNCTION MEETS

AGTex coated fabrics provide an impressive dimensional stability, tensile strength and tear strength in our product. Applying a proprietary surface treatment generates maximum protection quality against atmospheric, chemical, microbial, fungal attacks and harsh weather, whilst being resistant to ultra violet rays, thermal damage, rain, abrasion and most importantly being flame retardant. The performance of our coated fabrics takes the prominent space in dynamic modern lifestyle, where the endless aesthetic design and multi-functionality meets, as such stunning visual delights are created. The optimum flexibility to any versatile complex shapes permits AGTex coated fabrics to vigorously adapt to state-of-the-art trends and technologies for today and tomorrow.

TECHNICAL SPECIFICATION

The technical specification shown here are based on the best current available and average results from laboratory testing with at ±5% tolerance and provided as a source of information only and do not constitute any agreement concerning the good’s warranty and refers to the goods supplied on original state without any processing done by the customer.

The specification suggested here does not guarantee the particular application of the customer and it requires the customer to conduct their won comprehensive test concerning suitability of the material for its intended application.



Coating Material : PVC (Polyvinyl Chloride)
Base Fabric : High Tenacity Polyester
Yarn Size : 1,100 DTex
Total Weight : 750 gr/m2
Width : 250 cm, 300 cm
Thickness : 0.65 mm
Tensile Strength (warp/weft) : 300/300 daN/5cm
Tear Strength (warp/weft) : 30/30 daN
Working Temperature : -30 ∼ +70 oC
Flame Retardancy : Yes (B1, B-s1, d0)
Adhesion (warp/weft) : 10/10 daN/5cm
Lacquering (top/bottom) : PVDF/Acrylic
Coating Material : PVC (Polyvinyl Chloride)
Base Fabric : High Tenacity Polyester
Yarn Size : 1,100 DTex
Total Weight : 950 gr/m2
Width : 250 cm, 300 cm
Thickness : 0.75 mm
Tensile Strength (warp/weft) : 400/400 daN/5cm
Tear Strength (warp/weft) : 50/50 daN
Working Temperature : -30 ∼ +70 oC
Flame Retardancy : Yes (B1, B-s1, d0)
Adhesion (warp/weft) : 12/12 daN/5cm
Lacquering (top/bottom) : PVDF/Acrylic
Standard EN ISO 2076 : Yarn Size
Standard EN ISO 2286-2 : Total Weight & Thickness
Standard EN ISO 1421 : Tensile Strength
Standard EN ISO 2411 : Adhesion
Standard DIN 53363 : Tear Strength
Standard DIN 4101-1 : Flame Retardancy (B1)
Standard DIN 13501-1 : Flame Retardancy (B-s1, d0)
Coating Material : PVC (Polyvinyl Chloride)
Base Fabric : High Tenacity Polyester
Yarn Size : 1,100 DTex
Total Weight : 850 gr/m2
Width : 250 cm, 300 cm
Thickness : 0.7 mm
Tensile Strength (warp/weft) : 300/300 daN/5cm
Tear Strength (warp/weft) : 30/30 daN
Working Temperature : -30 ∼ +70 oC
Flame Retardancy : Yes (B1, B-s1, d0)
Adhesion (warp/weft) : 10/10 daN/5cm
Lacquering (top/bottom) : PVDF/Acrylic
Standard EN ISO 2076 : Yarn Size
Standard EN ISO 2286-2 : Total Weight & Thickness
Standard EN ISO 1421 : Tensile Strength
Standard EN ISO 2411 : Adhesion
Standard DIN 53363 : Tear Strength
Standard DIN 4101-1 : Flame Retardancy (B1)
Standard DIN 13501-1 : Flame Retardancy (B-s1, d0)

DOWNLOAD CATALOGUE

COMPOSITE MEMBRANE

  1. Base Fabrics
  2. Primary Coating
  3. Top Coating
  4. Surface Treatment (Lacquering)

BASE FABRIC

A woven base fabric of high tenacity polyester yarns is the base material to provide tear strength, tensile strength and dimensional stability on finished product.

SURFACE TREATMENT (LACQUERING)

Applying the lacquer on the surface generates the maximum protection quality against atmospheric chemical, microbial and fungal attacks, weather and environment friendly resistance to Ultra Violet Thermal, Rain, Abrasion and Flame Retardant.

THE MAJOR ADVANTAGES

  • Limitless architectural design possibility
  • Low construction cost & efficiency
  • Available for large size roofings & fitting
  • Lightweight and flexible yet strong and durable
  • Easy handling and fast installation
  • Mobile, temporary and permanent basis use
  • Weather and environmental friendly

MAIN BENEFITS

  • Printable and Easily Absorb the Ink
  • Excellent Tensile and Tear Strength
  • Easy Maintenance
  • Waterproof and Superb Protection Against Ultra Violet

ATEJA GRACE TEXINDO, PT

Jl. Raya Batujajar KM 3 No. 330

Padalarang, Bandung – Jawa Barat, Indonesia

T: +62 22 6866028

E: agtex@agtex.co.id

OTHER PLANT

ATEJA MULTI INDUSTRI

ATEJA TRITUNGGAL 1

ATEJA TRITUNGGAL 2

ATEJA TRITUNGGAL 4

ATEJA TRITUNGGAL 6

INTERNATIONAL BRANDS

ATEJA – Interior Fabric

ATEJA – Mattress Ticking

ATEJA – Transportation Interior

ATEJA – Bus Cloth

ATEJA – Flooring

ATEJA HEALTH CARE – Face Mask & Hazmat

LORENZIA – Contract Fabric

SUNPROOF – Technical Textile for Outdoor

SOLARCOOL – Technical Textile for Window

AGTEX – Composite Membrane

EDHO – Drapery

FOLLOW OUR SOCIAL MEDIA